Perko 0630 Manual do Utilizador descarregar pdf

Cat. Nos. 0630 Series P-Trap Gas Tank Vent

For EPA Fuel Systems

INSTALLATION INSTRUCTIONS

Read all directions before proceeding.

Note: These p-traps are for use on fuel tanks to comply with the new CARB and EPA standards and meet the requirements

of U.S.C.G. Safety Standards (July 31, 2011) for 40 CFR Parts 9, 60, 80 et al. (Control of Diurnal Emissions From Nonroad

Spark-Ignition Engines and Equipment).

1). The P-Trap vent must be installed in accordance with U.S.C.G. Safety Standards for Boat Gasoline Fuel Systems,

#33CFR183 and A.B.Y.C. Standard H-24. Note: The p-trap must be mounted within 20° of vertical.

2). Locate the mounting surface with a thickness up to 3/4 inch maximum.

3). Drill a 1-5/8 inch diameter hole in the mounting surface.

4). Remove nuts and mounting flange from adapter.

5). Apply bedding compound around the outside of the mounting hole front, and insert escutcheon and adapter into the

mounting hole.

6). Attach the mounting flange and nut. Tighten securely against the mounting surface.

7). Attach second nut loosely onto the adapter, then attach P-Trap body to the adapter. Tighten second nut by backing out

against the P-Trap body.

8). Attach the vent hose to the barbed end of the P-Trap body, and secure with a hose clamp.

9). To pressure test the fuel system, remove the splash guard vent cap, and attach an optional orange or red test cap

(Cat. No. 0102).

10). Remove test cap, and re-attach vent cap after pressure testing.

*The above referenced standards can be obtained from:

(1). American Boat & Yacht Council, Inc. (2) U.S. Coast Guard (3). E.P.A.

613 Third Street, Suite 10 Washington, D.C. 20593 401 “M” Street S.W.

Annapolis, MD 21403 (or you local C.G. office) Washington, D.C. 20460

CARB

Mounting Diagram

Escutcheon

Hull Mounting Surface

P-Trap Body

Flanged Nuts

Drill 1-5/8” Dia. Hole

3/4” Max. Thickness

Adapter

Splash Guard

Vent Cap

Mounting Flange

9/11

0630INS1

Perko, Inc.

16490 N.W. 13th Ave.

Miami, Fl 33169-5707

www.perko.com

CARB

Hose Barb

Mounting Diagram 1

Resumo do Conteúdo

Página 1 - Mounting Diagram

Cat. Nos. 0630 Series P-Trap Gas Tank Vent For EPA Fuel SystemsINSTALLATION INSTRUCTIONSRead all directions before proceeding.Note: These p-traps are

Comentários a estes Manuais

Sem comentários

Perko 0630 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Perko 0630. PERKO 0630 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Perko 0630